Aggressively remove coatings and create a bonding surface in 1 Step
Close up of a WerkMaster CSP3 profile on concrete
A WerkMaster concrete surface grinder is used to remove surface contamination and other foreign materials for new floor coverings or cementitious materials. Floor surface preparation is considered to be the most important step of any flooring application, which is why you should only do business with the best floor surface preparation manufacturers. Using the right diamond grinding tooling ensures effective removal when grinding concrete. Surface prep can be mastered with our concrete surface grinders, Octi-Disc™ Technology, and our diamond grinding tooling. These items will remove coatings like ceramic tile thin set, mastic, epoxy and carpet glue while leaving behind a clean bonding surface that meets or exceeds shot blasting requirements of CSP 2 or 3.
As floor surface preparation manufacturers, we strive to carry nothing short of the top equipment.
PCD Tooling
PCD with TCD Shark
Polycrystalline diamond tooling (PCD)
- Excellent tool for aggressive removal of epoxy
- Very good for removing high build coatings
- Very good for removing cement levellers and toppings
- Use on concrete
- Speed Range: 400–900 rpm
What is a PCD Diamond?
Polycrystalline Diamond (PCD) is a diamond grit that has been fused together under high-pressure, high-temperature conditions in the presence of a catalytic metal. This diamond tool will leave heavy to severe scratch patterns and it is recommended you use a Super Brazed diamond on the same tooling plate when using PCD tooling
Scarab | The Edge | RASP | Raider XL5 | Titan XT | Titan XT Propane | Colossos XT | Colossos XT Propane
Can be used in conjunction with all Metal Bond Tooling except for S – Seg
See our machine specific tooling guide for your machine
002-1349-00 PCD w/TCD Shark CCW
002-1350-00 PCD w/TCD Shark CW
Metal Bond Diamond Tooling
Standard Shark
Standard 2 Segment Shark 16 Grit
- Durable, premium quality tool
- General purpose for coating removal, profiling and grinding
- Good for thin mil coating
- Use on concrete with standard tooling
- Speed Range: 450–800 rpm
For floors # 7.5-9 on MOHS Hardness Scale Use Gold Tooling (Soft Bond)
For floors # 4.75–7.5 on MOHS Hardness Scale Use White Tooling (Medium Bond)
For floors # 2–4.5 on MOHS Hardness Scale Use Red Tooling (Hard Bond)
Scarab | The Edge | RASP | Raider XL5
See our machine specific tooling guide for your machine
002-1496-00 Plug ‘N Go Standard 2 Segment Shark (Gold – Soft Bond)
002-1413-00 Plug ‘N Go Standard 2 Segment Shark (White – Medium Bond)
002-1414-00 Plug ‘N Go Standard 2 Segment Shark (Red – Hard Bond)
HD Shark
Professional Shark (HD) 16 Grit
- Durable, premium quality tool
- General purpose for coating removal, profiling and grinding
- Good for thin mil coating
- Use on concrete with HD tooling
- Speed Range: 450–850 rpm
For floors # 7.5-9 on MOHS Hardness Scale Use Gold Tooling (Soft Bond)
For floors # 4.75–7.5 on MOHS Hardness Scale Use White Tooling (Medium Bond)
For floors # 2–4.5 on MOHS Hardness Scale Use Red Tooling (Hard Bond)
See our machine specific tooling guide for your machine
002-1493-00 Plug ‘N Go HD 2 Segment Shark ( Gold – Soft Bond )
002-1426-00 Plug ‘N Go HD 2 Segment Shark ( White – Medium Bond )
002-1427-00 Plug ‘N Go HD 2 Segment Shark ( Red – Hard Bond )