Raptor XT Concrete Surface Preparation
WerkMaster Training Video explaining How To properly choose the correct Plug ‘n Go Diamond Abrasive Tooling configuration. Concrete Surface Preparation – How to Remove Thin set and Epoxy Paint as well as How to Do Corners, Edging Tips & Tricks.
Quick FAQs
What is the Raptor XT best suited for?
The Raptor XT is used widely for retail and small commercial projects. Removes thinset, epoxy, glue, paint and mastic; works on spalled or rained out concrete. Run wet or dry on concrete, stone, hardwood, terrazzo or VCT tile. Efficiently covers projects 3000 sq ft (279 sq m) and over.
What is the power requirement for a Raptor XT ?
Runs on single or 3 phase 220V power. Uses an 6 kW generator.
What is the footprint of a Raptor XT?
The Raptor XT weighs only 260 lbs (118 kg), has a 17” (43 cm) footprint and an auto sensing dual voltage variable frequency drive with a disc rotation speed range of 450 – 2100 rpm.
Features
- 7 Machines in 1
- Runs on single or 3 phase 220V power
- Plug ‘N Go Tooling System
- Edges to 1/8” of wall
- Adjustable handle
- 3 Year Parts & Labor Warranty
The WerkMaster Raptor XT is the most aggressive, powerful surface prep machine in its class, designed to meet the needs of today’s general contractor.
The Raptor XT is used widely for retail and small commercial projects. Grinder, stripper, sander, polisher, buffer, burnisher, polisher and edger – the Raptor XT is 7 Machines in 1. Removes thinset, epoxy, glue, paint and mastic; works on spalled or rained out concrete. Runs wet or dry on concrete, stone, terrazzo or VCT tile. Excellent for use on hardwood floors.
Features WerkMaster Octi-Disc technology with 8 counter rotating heads and the versatility of using our 5” (127 mm) ULTRA-FLEX Plug ‘N Go tooling system, the Raptor XT edges to within 1/8” (3 mm) of the wall.
Easy to use and operator friendly the Raptor XT weighs only 260 lbs (118 kg), has a 17” (43 cm) footprint and an auto sensing dual voltage variable frequency drive with a disc rotation speed range of 450 – 2100 rpm. Runs on single or 3 phase 220V power. Uses an 11 kW generator.
The dual action wet/dry vacuum port allows for dry, dust-free pick up and can be used with our optional water feature.
The Raptor XT has an adjustable, foldable handle for easy transport.
The Raptor XT comes with a 3 Year Parts and Labor Warranty.
Raptor XT Tooling Selection Guide
Determine the surface application, check to see if a tool works on that surface, then refer to the Tooling Selection Guide for descriptions, grits, rates of coverage, and costs /sq ft to choose the right tool for the job.
Download Guide