Plug ‘N Go Pad Driver Bumpers
Plug ‘N Go Bumpers
Plug ‘N Go, 1″ OD Bumper, avalable in: 40 Durom, Red, 60 Durom, Blue and 70 Durom, Black.
| Part # | Description |
|---|---|
| 008-0152-00 | 1″ OD Bumper 40 Durom Red |
| 008-0153-00 | 1″ OD Bumper 60 Durom Blue |
| 008-0208-00 | 1″ OD Bumper 70 Durom Black |
Plug ‘N Go Pad Driver Bumpers
Plug ‘N Go Bumper 5/8 OD
Plug ‘N Go, 5/8″ OD Bumper, avalable in: 60 Durom, Black.
This bumper goes on the most outer edge of your Plug ‘N Go plate.
| Part # | Description |
|---|---|
| 008-0154-00 | 5/8” OD Bumper 60 Durom Black |
Plug ‘N Go Pad Driver Grommets
Plug N’ Go Grommets
Plug ‘N Go, 1″ OD Grommet, avalable in: 40 Durom, Red, 60 Durom, Blue and 70 Durom, Black.
Plug ‘N Go, 5/8″ OD Grommet, avalable in: 60 Durom, Black.
| Part # | Description |
|---|---|
| 008-0150-00 | 1/2″ 40 Durom Red |
| 008-0206-00 | 1/2″ 40 Durom Black |
| 008-0192-00 | 3/8″ 40 Durom Green (For 3″ Pad Driver) |
| 008-0207-00 | 3/8″ 70 Durom Black (For 3″ Pad Driver) |
| 008-0151-00 | 5/8″ 60 Durom Blue (Titan & Colossos) |
| 008-0189-00 | 5/8″ 70 Durom Black (Titan & Colossos) |
| 008-0193-00 | 3/8″ 70 Durom Green (For 5″ Pad Driver) |
Plug ‘N Go Shear Pins
Shear Pin – Screw Combo
Use to replace snapped or damaged shear pins on the tooling plate of your WerkMaster Machine. Always use red loctite when re-installing screw back into shear pin.
| Part # | Description |
|---|---|
| 008-0618-00 | 3/8″ Shear Pin & 1/4″ Screw Combo (Gator) |
| 008-0114-00 | 3/8″ Shear Pin & 1/4″ Screw Combo (Scarab) |
| 008-0172-00 | 1/2″ Shear Pin & 1/4″ Screw Combo (Viper/Raptor XT) |
| 008-0418-00 | 1/2″ x 1″ Shear Pin & 1/4″x20 Screw Combo (Viper/Raptor/The Edge/RASP/Mirroir/Cobra/Razor/Python) |
| 008-0106-00 | 5/8″ Shear Pin & 1/4″ Screw Combo (Titan 1800) |
| 008-0106-00 | 5/8″ x 1″ Shear Pin & 1/4×20″ Screw Combo (Titan XT Aluminium Plate GEN 1) |
| 008-0106-00 | 5/8″ x 1″ Shear Pin & 1/4×20 Screw Combo(Titan XT Steel Plate GEN 2) |
| 008-0106-00 | 5/8″ Shear Pin & 1 1/4″ Screw Combo (Titan XT Steel Plate GEN 3) |
| 008-0107-00 | 5/8″ Shear Pin & 5/16″ Screw Combo (Colossos XT Aluminium Plate) |
| 008-0426-00 | 5/8″ Shear Pin & 1 1/4″ Screw Combo (Colossos XT Steel Plate) |
Ultra Flex Velcro Adapter Plates
Ultra Flex Adapter Plates
Use Ultra Flex Adapter Plates to make your WerkMaster Machine easily follow the contours of your floor when polishing concrete.
| Part # | Description |
|---|---|
| 008-0273-00 | 3″ Foam/Velcro Adapter Plates |
| 008-0190-00 | 4″ Foam/Velcro Adapter Plates |
| 008-0185-01 | 4 3/4″ Foam/Velcro Adapter Plates |
| 008-0352-00 | 5″ Foam/Velcro Adapter Plates |
| 008-0186-01 | 5 3/4″ Foam/Velcro Adapter Plates |
| 008-0187-01 | 6 3/4″ Foam/Velcro Adapter Plates |
| 008-0413-00 | 6 3/4″ Foam/Velcro Adapter Plates (Steel Plug ‘N Go Plate) |
| 008-0336-00 | 8″ Foam/Velcro Adapter Plates |
| 008-0397-00 | 8″ Foam/Velcro Adapter Plates (Steel Plug ‘N Go Plate) |
Plug ‘N Go Plate (Aluminium – Use with Aluminium Pad Driver only)
Plug N’ Go Plate
Use WerkMaster Plug N’ Go Plates to easily add or remove our diamond abrasive tooling.
| Part # | Description |
|---|---|
| 008-0265-00 | 3″ Plug ‘N Go Plate |
| 008-0168-02 | 4″ Plug ‘N Go Plate (2 or 4 position) |
| 008-0169-02 | 4 3/4″ Plug ‘N Go Plate (Raptor) |
| 008-0349-01 | 5″ Plug ‘N Go Plate (Viper XT/Raptor XT) |
| 008-0170-01 | 5 3/4″ Plug ‘N Go Plate (5/8 PNG Shear Pins-Titan) |
| 008-0171-01 | 6 3/4″ Plug ‘N Go Plate (Colossos) |
| 008-0361-00 | 6 3/4″ Plug ‘N Go Plate (Titan XT – Use with 008-0354-00) |
| 008-0304-00 | 8″ Plug ‘N Go Plate (Colossos XT Use with 008-0353-00) |
| 008-0368-00 | 8″ Plug ‘N Go Plate – Expanded Stoppers (Colossos XT Use with 008-0367-00) |
Ultra Flex Pad Drivers (Aluminium – Use with Aluminium Plug ‘N Go plate only)
Ultra Flex Pad Driver
Use WerkMaster Ultra Flex Pad drivers to easily add or remove our Plug N’ Go Plates.
| Part # | Description |
|---|---|
| 008-0280-00 | Scarab Pad Driver |
| 008-0155-00 | 3″ Pad Driver (Europa/Raptor) |
| 008-0261-01 | 3″ Pad Driver (Viper) |
| 008-0366-00 | 4″ Pad Driver (Expanded Bumpers – Viper XT/Raptor XT) |
| 008-0167-00 | 5″ Pad Driver (Titan/Colossos) |
| 008-0354-00 | 5 1/2″ Pad Driver (Titan XT – Use 008-0361-00) |
| 008-0353-00 | 6 1/2″ Pad Driver (Use with 008-0304-00) |
| 008-0367-00 | 6 1/2″ Pad Driver – Expanded Stoppers(Use with 008-0368-00) |
Compression Foam (Use with Aluminium Plug ‘N Go plate)
Compression Foam
Use Compression Foam to absorb the rebound of the Ultra Flex Plates when following the contours of your flooring surface.
| Part # | Description |
|---|---|
| 008-0310-00 | Compression Foam 4 1/2″ x 1/4 (All Titan 1800 Models) |
| 008-0310-01 | Compression Foam 4 1/2″ x 1/4 (Titan XT, Colossos XT) |
| 008-0318-00 | Compression Foam 3″ x 1/4 |
Plug N’ Go Plate (Steel – Use with steel Pad Driver only)
Plug ‘N Go Plate
Use WerkMaster Plug N’ Go Plates to easily add or remove our diamond abrasive tooling.
| Part # | Description |
|---|---|
| 008-0389-00 | 3″ Plug N’ Go Plate (Scarab) |
| 008-0391-00 | 5″ Plug N’ Go Plate (Viper/Raptor XTi) |
| 008-0381-00 | 6 3/4 Plug N’ Go Plate (Titan XT) |
| 008-0386-00 | 8″ Plug N’ Go Plate (Colossos XT) |
Ultra Flex Pad Drivers (Steel – Use with steel Plug ‘N Go plate only)
Ultra Flex Pad Driver
Use WerkMaster Ultra Flex Pad drivers to easily add or remove our Plug N’ Go Plates.
| Part # | Description |
|---|---|
| 008-0280-01 | 3″ Pad DriverScarab Pad Driver |
| 008-0366-01 | 4″ Pad Driver (Viper/Raptor XTi) |
| 008-0396-00 | 5 1/2″ Pad Driver (Titan XT) |
| 008-0397-00 | 6 1/2″ Pad Driver (Colossos XT) |
Compression Foam (Use with Steel Plug ‘N Go plate only)
Use Compression Foam to absorb the rebound of the Ultra Flex Plates when following the contours of your flooring surface.
| Part # | Description |
|---|---|
| 008-0415-00 | Soft Foam 3″ x 3/8″ (Scarab) |
| 008-0416-00 | Soft Foam 3 1/2″ x 3/8″ (Viper/Raptor XTi) |
| 008-0382-02 | Soft Foam 5 1/2″ x 3/8″ (Titan XT) |
| 008-0387-02 | Soft Foam 6 1/2″ x 3/8″ (Colossos XT) |